Guntermann & Drunck DVI-Vision-IP, Инструкция по установке и эксплуатации, Страница: 85 / 148

Installation
G&D DVI-Vision-IP · 8
English
Connecting the computer’s video output
DVI-D CPU: Use the DVI-D-SL-M/M-2 cable to connect the computer’s video output to
this interface.
Connecting audio and RS232 interfaces
Line In:
Use an
Audio-M/M-2
audio connection cable to connect the omputer’s
Line-
Out
interface to this interface
Line Out: Use an Audio-M/M-2 audio connection cable to connect the omputer’s Line-
In interface to this interface.
RS232: Use the RS232-M/F-2 cable to connect one of the computer’s 9-pin serial
interfaces to this interface.
NOTE:
One DVI-D CPU interface is available for every video channel of m ulti-channel
variants. The number behind the name of the interface assign each interface to a
particular channel.
NOTE: By default, the KVM switch transfers audio data between switches.
In addition, you can enable the transmission of RS232 data and, alternatively,
disable the transmission of audio data (see
(De)Activating signals
on page 21).