GULFSIP GS24P Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 112

background image

User Guide GULFSIP-‐GS24P

78

Receiving RTP Stream

You can configure the phone to receive a Real Time Transport Protocol (RTP) stream from the
pre-‐configured multicast address(es) without involving SIP signaling. You can specify up to 10
multicast addresses that the phone listens to on the network.

You can also change the behavior of how the phone handles incoming multicast paging calls by
configuring specific parameters via web user interface. The specific parameters are: Paging Barge

and

Paging Priority Active.

Paging Barge

You can use the paging barge feature to define the priority of the voice call in progress. If the priority
of an incoming multicast paging call is lower than that of the active call, then it will be ignored
automatically. If Disabled

is selected from the pull-‐down list of Paging Barge, the voice call in progress

shall take precedence over all incoming multicast paging calls. The valid values in the Paging Barge
field are:



1 to 10

: Define the priority of an active call, 1 is the highest priority, 10 is the lowest priority.



Disabled

: The voice call in progress shall take precedence over all incoming paging calls.

Paging Priority Active

You can enable or disable   this feature   to decide   how the   phone   handles the   incoming multicast paging
calls, when there   is already a   multicast paging call on the   phone. If enabled, the   phone   will ignore the
incoming multicast paging   call with a lower priority, otherwise, the phone will play the incoming
multicast RTP and place the previous multicast paging call on hold. If disabled, the phone will
automatically ignore   all incoming multicast paging calls.

To configure multicast listening addresses via web user interface:

1.

Click on

Contacts

-‐>

MulticastIP

.

2.

Select the desired value from the pull-‐down list of

Paging Barge

.

3.

Select the desired value from the pull-‐down list of

Paging Priority Active

.

4.

Enter the multicast IP address(es) and port number(e.g. 224.5.6.20:10008) which the phone
listens for incoming RTP multicast in the

Listening Address

field.

5.

Enter the label in the

Label

field. Label will appear on the LCD screen when receiving the RTP

multicast.

6.

Click

Confirm

to accept the change.

Note

The multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
The priorities of listening addresses are predefined: 1 with the highest priority, 10 with the lowest
priority.

Both the multicast paging sender and the receiver will play a warning tone when pressing the multicast
paging key.

«
...
90
91
92
93
94
...
»

Содержание GS24P

















































































































Отзывы:

Нет отзывов

Похожие инструкции для GS24P

Yealink SIP-T46G

Бренд: Yealink Страницы: 8

Бренд: ATCOM Страницы: 9

Бренд: Easiphone Страницы: 89

S3 Communicator

Бренд: Wurtec Страницы: 19

Бренд: Htek Страницы: 2

Бренд: Ericsson Страницы: 75

Бренд: Alcatel Страницы: 2

Бренд: Vonino Страницы: 58

Бренд: Yuxin Страницы: 42

Бренд: Audiovox Страницы: 52

Бренд: Baldwin Boxall Страницы: 93

Бренд: Verizon Страницы: 10

Бренд: Samsung Страницы: 119

Бренд: Samsung Страницы: 125

Бренд: Samsung Страницы: 104

ZENFONE 3 SERIES

Бренд: Asus Страницы: 35

Бренд: Asus Страницы: 81

Бренд: Asus Страницы: 80

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды