GULFSIP GS24P, Руководство пользователя

Страница: 64 / 112

User Guide GULFSIP-­‐GS24P
50
During a call, you can alternate between Speakerphone, Headset, or Handset modes by pressing the
speakerphone key, the HEADSET key, or picking up the handset.
The call duration of active call is visible on the LCD screen. In the figure below, the call to Kame has
lasted 1 minute and 8 seconds.
To place a call using the handset:
1. Pick up the handset.
2. Enter the desired number using the keypad.
3. Press , , or the Send soft key.
By default, the # key is set as a send key. You can also set the * key as a send key or set neither of
them as send keys. For more information, refer to the
Key as Send on page 24 .
Note
To place a call using the hands-­‐free speakerphone mode:
Do one of the following:
- With the handset on-­‐hook, press or the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press , , or the Send soft key.
- With the handset on-­‐hook, enter the desired number using the keypad.
Press , , , or the Send soft key.
To place a call using the headset:
Do one of the following:
-
With the optional headset connected, press to activate the headset mode.
Press the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press , , or the Send soft key.
-
With the optional headset connected, press to activate the headset mode.
You can also dial using the SIP URI or IP address. To obtain the IP address of your phone, press the OK
key. The maximum SIP URI or IP address length is 32 characters. For example, 192.168.1.15,
sip:2210@sip.com.
Your phone may not support direct IP dialing. Contact your system administrator for more information.