GULFSIP GS24P Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 112

background image

User Guide GULFSIP-‐GS24P

92

Regulatory Notices

Service Agreements

Contact your GULFSIP Authorized Reseller for information about service agreements applicable to
your product.

Limitations of Liability

TO THE   FULL EXTENT   ALLOWED BY LAW, GULFSIP EXCLUDES FOR   ITSELF AND   ITS SUPPLIERS
ANY LIABILITY, WHETHER BASED   IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR
INCIDENTAL,   CONSEQUENTIAL,   INDIRECT,   SPECIAL,   OR PUNITIVE DAMAGES OF ANY KIND, OR
FOR LOSS   OF   REVENUE OR PROFITS, LOSS   OF   BUSINESS, LOSS   OF   INFORMATION OR DATA, OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF
GULFSIP OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
AMAGES, AND   LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND   OF THE PURCHASE
RICE   PAID, AT   GULFSIP’S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE
AFFECTED   IF ANY REMEDY PROVIDED   HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.

Safety Instructions

Save these instructions. Read these safety instructions before use!

The following basic safety precautions should always be followed to reduce risk of fire, electrical shock,
and other personal injury.

General Requirements



Before you install and use the device, read the safety instructions carefully and observe
the situation during operation.



During the process of storage, transportation, and operation, please always keep the
device dry and clean.



During the process of storage, transportation, and operation, please avoid collision and
crash of the device.



Please attempt not to dismantle the device by yourself. In case of any discrepancy, please
contact the appointed maintenance center for repair.



Without prior written consent, no organization or individual is permitted to make any
change to the structure or the safety design of the device. GULFSIP is under no
circumstance liable to consequences or legal issues caused by such changes.



Please refer to the relevant laws and statutes while using the device. Legal rights of
others should be respected as well.

Environmental Requirements



Place the device at a well-‐ventilated place. Do not expose the device under direct
sunlight.



Keep the device dry and free of dusts.



Place the device on a stable and level platform.



Please place no heavy objects on the device in case of damage and deformation caused
by the heavy load.



Keep at least 10 cm between the device and the closest object for heat dissipation.

«
...
104
105
106
107
108
...
»

Содержание GS24P

















































































































Отзывы:

Нет отзывов

Похожие инструкции для GS24P

Бренд: TCL Страницы: 22

Бренд: GAI-Tronics Страницы: 32

SPH-a660 Series

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 73

Бренд: Samsung Страницы: 164

SCH-a600 Series

Бренд: Samsung Страницы: 2

Бренд: Xblue Networks Страницы: 98

Бренд: Barracuda Страницы: 4

Бренд: T-Mobile Страницы: 29

Бренд: M4 Страницы: 13

Xperia ZL2 Sol25

Бренд: AU Страницы: 2

Бренд: Grandstream Networks Страницы: 29

Бренд: Gigaset Страницы: 88

Бренд: Sony Ericsson Страницы: 102

Бренд: ATCOM Страницы: 10

Бренд: HTC Страницы: 4

Бренд: Gigo Страницы: 22

Бренд: G'Five Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды