Guilin Feiyu Electronic Technology Co.,Ltd
Guilin Feiyu Electronic Technology Co.,Ltd http://www.feiyudz.cn Tel:0773-5815749
28
6
.
Click the green “connect” button from the “master switch” which in the lower right corner of the
software interface, the "Save track log" file dialog box will pop
up, you must enter the location and file name where you want to
save the flight track (recommended to use the current date and
take-off movements times to name the track file names, such as
the :20070501-1. txt), and then click "Save" will begin to
communicate with the autopilot panel and began to record
telemetry data to the track log file.
If the port work normally, the first square indicating light inside the "master switch" box
should turn from red to green which means the port open properly .
7
.
The biggest part of the center software interface is the map display section, if communicate
with the autopilot successfully, and after the GPS has been 3D positioned, a red "aircraft"
symbol will appear on the map, this point is the location and the movement direction of the
aircraft on the map; moving the plane 10 meters, you can see the aircraft on the electronic map
moves as well, blue tracks will be formed on the moved location.