Guilin Feiyu Electronic Technology Co.,Ltd
Guilin Feiyu Electronic Technology Co.,Ltd http://www.feiyudz.cn Tel:0773-5815749
22
The debugging of auto take off can’t continue until you finished the debugging of auto
balance mode and navigation parameter.
Set the climb pitching angle when the flight auto takes off..
Set the climbing speed.
If a hand launch plane set a return point, the height of the return point is 200 meters .once it
take off automatically, it will circled around the return point.
The procession of auto take off is as bellowing:
I.
Once the GPS positioned, click “Auto Take Off” on the ground software.
II.
After turn to green color, switch CH6 switch to “Return” point.
III.
Push the throttle to the throttle location of take off and throw the flight horizontally.
IV.
The flight keep straight flight, when it’s getting to the climb speed, it will climb to about 50
meters according to climb angle, the process of auto take off finished. (The operator can also
remote control the aircraft through this process.)
V.
Carry out circle program around the return point and rise to 200 meters gradually.
Notice: After adjust the parameters, click “Permanently Preserve Parameter” on time, or once the
autopilot off power, all the adjust parameters will be lost.
The above is belong to normal adjust method, may not go with
all the flight types. Users have to do relevant debugging according to specific type.
Ground Control Software FYGCS2.1
FYGCS2.1 is the ground control software of FY-3ZT , the main functions include electronic
map, telemetry data monitoring, flight attitude instrument, speed, attitude instrument, location, and
telemetry data recording and playback, air route editing , map loading management
ect
. The
interface of FYGCS2.1 include shortcut toolbar, status displays bar, the flight instrument display,
electronic map display area, air route and navigation parameter setting area.
1
．
Software Operating Environment
CPU frequency:
1GHz or more.
Memory capacity:
256MB or more.
Hard disk space:
At least 50MB free disk space.
Operating System:
Windows98, Windows2000, Windows XP system.
Monitor:
1024x768 resolution or above.
The computer Serial Port:
Support 9-pin serial port or USB serial converter which baud rate
is 19200 or more.
Other Peripherals:
Keyboard, Mouse.
2. End User License Agreement
The "User License Agreement" ("Agreement") is a legal agreement between you-“you”
means either a individual or a business organization and Guilin FeiYu Electronic Technology
Co,Ltd.
By installing ,copying or otherwise using the software , you agree to be bound by the terms of
this Agreement .If you do not agree to the teams of the Agreement ,You are not permitted to use
the software.
User shall not delete any copyright imformation of this software and the other copies
，
and
