6
Getting started
Here you can find information necessary to put newly purchased equipment to
operation. Read information about current loop connection carefully.
What is needed for operation
To install the unit, you need to the following equipment. Please check if it is available before
installation.
•
AR004798
current loop converter
•
screwdriver for removing cover
•
power supply
–
according to specification (commonly DC 24 V/1.0 A)
•
RJ45 LAN connection with appropriate cable
•
free IP address in your network
•
sensor(s) with current loop output (4-20 mA or 0-20 mA)
Mounting the device
•
check if the equipment from the previous chapter is available
•
install the latest version of TSensor software. This software will help you find
device on network and to change IP address of the device. Device configuration
is made using web interface. TSensor software can be downloaded from the
manufacturer’s
website.
•
contact your network administrator to obtain following information for the
connection to the network:
IP address:
_____._____._____._____
Gateway:
_____._____._____._____
Netmask:
_____._____._____._____
DNS IP address: _____._____._____._____
Chapter
2