12
Channels
Channel can be enabled or disabled for measuring using checkbox
Enabled
. Channel can
be renamed, and unit of channel can be changed. Measured current is recalculated to physical
representation according to selected linear equation. Number of decimal places is selectable.
All changes must be confirmed using
Apply settings
button. History values are cleared after
changing of channel settings.
SOAP protocol
SOAP protocol can be enabled by option
SOAP protocol enabled
. Address of the
destination http server is configurable via
SOAP server address
filed. For setup of
destination server port can be used option
SOAP server port
. Device sends SOAP message
according selected
Sending interval
. Option
Send SOAP message
when alarm occurs
sends message when an alarm on channel occurs or alarm is cleared. These SOAP messages
are sent asynchronously to selected interval.
SOAP protocol is used for data transfers into Cloud or Database. Detail description of
setup you find at documentation for each data acquisition system.