Gude expert net control 2101/2151, Руководство пользователя

Страница: 7 / 23

7
expert net control 2101/2151 Configuration
4.2
Network settings with GBL_Conf
For changing the network properties manually, the program GBL_Conf.exe is required. This tool is available for free on our
website www.gude.info.
Furthermore GBL_Conf.exe enables you to install firmware updates and to reset expert net control 2101/2151 to its factory
settings.
Activate bootloader mode of expert net control 2101/2151 and run GBL_Conf.exe. The program will look automatically for
connected devices and will display their network configuration.
If the displayed IP address accords with the factory settings (192.168.0.2), there is either no DHCP server available in the
network or no free IP address could be allocated.
Enter a free IP address and the according netmask in the entry mask, then save these changes by clicking on Program
Device SaveConfig.
Restart the firmware of expert net control 2101/2151, so that the changes will take effect. Now click on Search in order to
have the new network configuration displayed.