Gude expert net control 2101/2151, Руководство пользователя

Страница: 5 / 23

5
expert net control 2101/2151 Security Advise
1 Security Advise
The device must be installed only by qualified personnel according to the following installation and operating instructions.
The manufacturer does not accept responsibility in case of improper use of the device and particularly any use of equipment
that may cause personal injury or material damage.
Check if the power cord, the plug and the socket are in proper condition.
The device can be connected only to 230V AC (50 or 60 Hz) sockets.
Always connect the device to properly grounded power sockets.To connect a Power-over-Ethernet device, use only certified
and CE marked hardware.
The device is intended for indoor use only. Do NOT install them in an area where excessive moisture or heat is present.
Because of safety and approval issues it is not allowed to modify the device without our permission.
Please note the safety advises and manuals of connected devices, too.
The device is NOT a toy. It has to be used or stored out or range of children.
Packaging material is NOT a toy. Plastics has to be stored out of range of children. Please recycle the packaging materials.
In case of further questions, about installation, operation or usage of the device, which are not clear after reading the manual,
please do not hesitate to ask our support team.
2 Description
expert net control 2101/2151 is a handy little device suitable for different kinds of telecontrolling. In- and output ports on the
device allow to monitor upt to two sensors and switch a contact through a TCP/IP network. expert net control 2101/2151
makes it possible to monitor and switch from any computer in the same LAN and from the Internet.
For installation just connect the power and network cables to expert net control 2101/2151.
After the device has received an IP address every client in the same network is able to switch the output and control the
sensors via webinterface. expert net control 2101/2151 offers also features like SNMP and Syslog.
expert net control 2101/2151 comprises of two sensor interfaces and one switching output.
A watchdog function for the output is implemented.
3 Hardware
3.1
Content of delivery
Included in delivery are:
expert net control 2101/2151
3.2
Connections
1) Status LED