Gude expert net control 2101/2151, Руководство пользователя

Страница: 12 / 23

12
expert net control 2101/2151 Configuration
4.3.4.1 HTTP Port
Here you can enter the HTTP port number, if necessary. Possible numbers are 1 ... 65534 (standard: 80). To get access to
expert net control 2101/2151, you have to enter the port number behind the IP address of expert net control 2101/2151, e.
g.: http://192.168.0.2:1720
All changes need a restart of the firmware to get valid.
4.3.4.2 Require HTTP Password
Password protected access can be activated here. In this case, a user and an admin password have to be defined.
Passwords have a maximum lengths of 15 characters.
Administrators are authorized to switch all ports and to modify the settings of expert net control 2101/2151 and of all ports.
The username of the admin is “admin”.
Users are authorized to switch all ports but are not allowed to modify the settings of neither expert net control 2101/2151
nor the ports. The username of the user is “user”.
If you have forgotten your password, activate the bootloader mode of expert net control 2101/2151, start GBL-Conf.exe and
deactivate the password request.
All changes need a restart of the firmware to get valid.
4.3.4.3 Check Password on start page
If activated, the user has to enter his password, before logging in to the webinterface.
4.3.5 Configuration - Messages