Gude expert net control 2101/2151, Руководство пользователя

Страница: 8 / 23

8
expert net control 2101/2151 Configuration
4.3
Configuration via webinterface
Go to the website of expert net control 2101/2151. Enter the IP address of expert net control 2101/2151 into the address
line of your internet browser:
http://”IP address of expert net control 2101/2151”/
and press LOGIN.
To enter the configuration menu, click on „Configuration“ on the upper left side of the screen.
4.3.1 Configuration - Output Ports
4.3.1.1 Label
A name with a maximum of 15 characters can be entered here for each output.
4.3.1.2 Initialization status
The output’s switching state after a power-on of the device can be defined here (on, off, remember last state).
4.3.1.3 Initialization delay
While this function is enabled, the output will reactive after the stated time, when it got switched off.
4.3.1.4 Repower delay
While this function is enabled, the output will reactive after the stated time, when it got switched off.
4.3.1.5 Watchdog Funktion
While using the watchdog, electrical devices can be observed. The watchdog sends ICMP-pings or TCP-pings to the device.
If these pings were not answered, during a defined delay (time or pings), the power port will reset. The watchdog function
allows to restart e.g. crashed servers or NAS systems.
You can check the watchdog function and other imformation inside of the switching menu. There are different colors: