Gude expert net control 2101/2151, Руководство пользователя

Страница: 18 / 23

18
expert net control 2101/2151 Operation
5.2.3 Control Panel
Sie können nun den Relais-Kontakt direkt schalten. Der aktuelle Schaltzustand des Relais-Kontakts wird optisch dargestellt
(rot=ausgeschaltet/grün=eingeschaltet).
In der Mitte des Fensters sehen Sie die Messwerte der Sensoren und den Status des Power-over-Ethernet-Netzteils. Neben
den Messwerten werden die Max/Min Werte der letzten 24 Stunden dargestellt. Diese können Sie durch einen Klick auf
Reset Min Max zurücksetzen.
5.2.3.1 Reset
By using this function, the port will be switched off. Ten seconds later, th eport will switch on again, autmatically.
5.2.3.2 Batchmode
The output of expert net control 2101/2151 can be switched on or switched off for a selectable delay (1-30 sec. or 1-30
min.). After the chosen delay the selected port will be switched off or switched on again auto-matically.
Optionally the device can be accessed by using the perl script „EPC_Control2.pl” through the command line (e.g. for
automatic or time-triggered switching).
For more information please refer to our website:
www.gude.info/wiki
5.3
Sensor
Connect the temperature sensor with the sensor connector at the front of the device. If it is connected exactly, the recent
temperature is displayed in the login window, in the switching window and can be requested via SNMP.
The temperature sensor can be ordered as additional supplies. More information can be found at www.gude.info or requested
at mail@gude.info.
Temperature sensor 7101
Cable length ˜ 2m
Connection RJ45
Measurement -20°C - +100°C ±2°C (max) and ±1°C (typical)
Hybrid sensor 7102
Cable length ˜ 2m
Connection RJ45
Measurement -20 - +80 Grad, ± 0,5°C / Moisture 0-100% ±3%