EMC Professional NET
26
27
EMC Professional NET
Configuration - Clock
LCD Display
Here you can choose, which time
format shell be displayed at the
LC-Display of
EMC Prof NET
(19“)
. You can switch between
CET/CEST and UTC.
V.24 output protocol
Here you can choose the format
which shell be used by the RS232
interface. (see 4.3).
Language
Here you can change the langu-
age, displayed in the LC-Display.
You can choose between German,
English, Dutch und Danish.
Time switch clock settings
Here you activate and configure the programmable relais outlet.
You can enter date and time for activation/deactivation of the
relais outlet. Confirm your settings by clicking at „
Set
“.
The settings are active, if the time switch clock is active. Activate
it and confirm by „
Apply
“.
Syslog debug output
Here you can activate the debug output via syslog.
Allow DCF77 time jump
Here you can activate time jumps. If active the time of the clock
can switch more than ten seconds in radio mode and more than
one hour when the mode changes from quarz to radio.
Figure 19 Configuration
- Clock
