EMC Professional NET
4
5
EMC Professional NET
Security declaration
The device must be installed only by qualified personnel accord-
ing to the following installation and operating instructions.
The manufacturer does not accept responsibility in case of im-
proper use of the device and particularly any use of equipment
that may cause personal injury or material damage.
The device contains no user-maintenable parts. All maintenance
has to be performed by factorytrained service personnel.
Check if the power cord, the plug and the socket are in proper
condition.
The device can be connected only to 230V AC (50 or 60 Hz)
sockets.
Always connect the device to properly grounded power sock-
ets.
The device is intended for indoor use only. Do NOT install them
in an area where excessive moisture or heat is present.
Because of safety and approval issues it is not allowed to modify
the device without our permission.
Please note the safety advises and manuals of connected de-
vices, too.
The device is NOT a toy. It has to be used or stored out or range
of children.
Packaging material is NOT a toy. Plastics has to be stored out of
range of children. Please recycle the packaging materials.
In case of further questions, about installation, operation or usa-
ge of the device, which are not clear after reading the manual,
please do not hesitate to ask our support team.
