EMC Professional NET
18
19
EMC Professional NET
V.24
V.24 State
The state of the data transfer of the serial interface is shown
here:
„active“
/
„active in ... seconds“
: DCF time signals are re-
ceived at serial interface of the PC. The system time is
compared with DCF time.
„No receive!“
: There is no receive of signals at the choos-
en serial interface. Please check if you choose the correct
COM-port and if the cable is connected correctly to your
PC.
„No COM-port selected“
: There is no COM-port selected
to receive the signals of
EMC Prof NET (19“)
.
Interface
The selected COM-port is displayed here.
Log
The recently received time telegram is displayed here as an
ASCII string.
4.1.4 Logmode
The software
w32EMC
allows you to protocol all actions and
additional error messages in a log file. This is important for ad-
ministration or bugfixing.
You can start the logmode at the start of the software. Sie kön-
nen den Logbetrieb beim Programmstart aktivieren. Therefore
you have to use the command line parameter „
-l
“. While starting
the program with the command line, simply enter the parameter
behind the start command (
„c:\programme\EMCprof>w32EMC
–l“).
Another solution is to create a shortcut.
All information in logmode will be written to the file
logfile.emc
,
which is located in the program folder of
w32EMC
.
