EMC Professional NET
28
29
EMC Professional NET
Configuration - IP ACL
Reply ICMP-Ping requests
Here you can set, if
EMC Prof
NET (19”)
shell react on pings.
Enable IP Filter
Here you can activate the IP Ac-
cess Control List (IP ACL) of
EMC
Prof NET (19”)
.
If IP ACL is active, DHCP and
SNMP only work, if all neces-
sary servers and clients are
registered in this List.
Configuration - HTTP
HTTP Port
Here you can enter the HTTP port
number, if necessary. Possible
numbers are 1 ... 65534 (standard:
80). To get access to
EMC Prof
NET (19”)
, you have to enter the
port number behind the IP address
of
EMC Prof NET (19”)
:
http://192.168.0.2:1720
Require HTTP Password
Password protected access can be activated here. In this case,
a user and an admin password have to be defined. Passwords
have a maximum lengths of 15 characters.
Administrators are authorized to switch all ports and to modify
the settings of
EMC Prof NET (19”)
and of all ports. The user-
name of the admin is
“admin”
.
All changes need a restart of the firmware to get valid.
Figure 22 Configuration - HTTP
Figure 21 Configuration - IP
ACL
