GÜDE Expert Power Control 8041 Series, Руководство пользователя

Страница: 92 / 118

92
Expert Power Control 8041/8045 © 2022 GUDE Systems GmbH
Specifications
mqtt enters cmd group "mqtt"
mqtt {broker_idx} enabled set {OFF=0|ON=1} enable mqtt
mqtt {broker_idx} enabled show show s if mqtt enabled
mqtt {broker_idx} server set "{dns_name}" sets broker name
mqtt {broker_idx} server show show s broker name
mqtt {broker_idx} tls enabled set {OFF=0|ON=1} enable TLS
mqtt {broker_idx} tls enabled show show s if TLS enabled
mqtt {broker_idx} port set {ip_port} set broker TCP/IP port
mqtt {broker_idx} port show show s broker TCP/IP port
mqtt {broker_idx} user set "{username}" sets username
mqtt {broker_idx} user show show s username
mqtt {broker_idx} passw d set "{passw d}" sets passw ord
mqtt {broker_idx} passw d hash set "{passw d}" sets hashed passw d
mqtt {broker_idx} client set "{name}" sets client name
mqtt {broker_idx} client show show s client name
mqtt {broker_idx} qos set {QOS0=0|QOS1=1} sets QoS level
mqtt {broker_idx} qos show show s QoS level
mqtt {broker_idx} keepalive set {num_secs} sets keep-alive time
mqtt {broker_idx} keepalive show show s keep-alive time
mqtt {broker_idx} topic set "{name}" sets topic prefix
mqtt {broker_idx} topic show shw os topic prefix
mqtt {broker_idx} console enabled set {OFF=0|
ON=1}
permit console cmds
mqtt {broker_idx} console enabled show show s if console cmds allow ed
mqtt {broker_idx} device data timer set
{num_secs}
sets telemetry interval
mqtt {broker_idx} device data timer show show s telemetry interval
port enters cmd group "port"
port {port_num} state set {OFF=0|ON=1} sets port to new state
port {port_num} state show show s port state
port all state set "{port_list}" {OFF=0|ON=1}
sets several ports in one cmd - e.g. port all state
set "1,3,5" 1
port all state {MODE0=0|MODE1=1|MODE2=2}
show
show s all port states in 3 different view modes 4
port all set {OFF=0|ON=1|OFF_REV=2|ON_REV=3} sw itch all ports on/off forw ard or reverse
port restart all set {REINIT=0|
OFF_REV_REINIT=1,OFF_REINIT=2}
reinit coldstart sequence (optional first all off)
port {port_num} reset start reset sequence for port
port {port_num} toggle toggles port
port {port_num} batch set {OFF=0|ON=1} w ait
{num_secs} {OFF=0|ON=1}
starts batch mode for port
port {port_num} batch cancel cancels batch mode
port {port_num} label set "{name}" sets port label name
port {port_num} label show show s port label name
port {port_num} initstate coldstart set {OFF=0|
ON=1|REMEMBER=2}
sets port coldstart initialization
port {port_num} initstate coldstart show show s port coldstart initialization
port {port_num} initstate delay set {num} sets port init delay
port {port_num} initstate delay show show s port init delay
port {port_num} repow erdelay set {num} sets port repow er delay
port {port_num} repow erdelay show show s port repow er delay
port {port_num} resettime set {num} sets port reset duration
port {port_num} resettime show show s port reset duration
port {port_num} w atchdog enabled set {OFF=0|
ON=1}
sets port w atchdog to on/off
port {port_num} w atchdog enabled show show s port w atchdog state
port {port_num} w atchdog mode set {OFF=0|
PORT_RESET=1|IP_MS=2|IP_MS_INV=3}
sets port w atchdog mode
port {port_num} w atchdog mode show show s port w atchdog mode
port {port_num} w atchdog type set {WD_ICMP=0|
WD_TCP=1}
sets port w atchdog type
port {port_num} w atchdog type show show s port w atchdog type
port {port_num} w atchdog link dow n set {OFF=0|
ON=1}
sets if w atchdog active w hen eth link dow n