The Roll-Up III
28
Care and Handling of Roll-Up III
The Roll-Up III was designed to be both portable and durable. As with any
product, it requires proper care and handling for reliable operation. By
following these recommendations, your Roll-Up III digitizer will provide
you with many years of service:
Always use the Roll-Up III on a flat surface, where no part of the unit is
unsupported.
Before moving the digitizer, disconnect the transducer, interface
cable, and power supply, if connected.
Before moving the digitizer, roll it up. The housing along the side of
the digitizer is designed as a rolling aid and it allows you to easily
control the rolling action. (See the
Transporting Roll-Up III
section on
the next page for specific moving instructions.)
Don’t permanently attach anything to the digitizer.
Don’t use sharp instruments on or near the Roll-Up III to avoid
scratching or cutting it. Cuts in the digitizer will void your warranty.
Don’t crease, dent, or abuse the digitizer. Creases can damage the
digitizer structure. Severe creases or abuse will void your warranty.
Clean your Roll-Up III with any mild, nonabrasive household cleaner.
Rubbing alcohol is recommended. Do not apply liquid directly to the
surface of the Roll-Up III. Spray the cleaning solution on a cloth and
wipe it over the surface. After cleaning, dry the surface to avoid
possible digitizing errors.
Care and Handling
