The Roll-Up III
12
The SuperSet Menu
Changing the Digitizer’s Orientation
The Roll-Up III lets you choose between two different digitizer orientations:
you can orient the digitizer with the controller Housing on your right (the
factory default), or you can orient it with the Housing on your left.
To change the orientation of the digitizer:
1
Turn the digitizer to the desired orientation.
2
Relocate the origin by clicking on the
button on the SuperSet
Menu that is located in the lower left corner of the digitizer. You will
hear four short tones when you do this.
Turning the Alarm Off and On
You can disable the alarm
if you don’t want to hear a tone each time the
transducer button is pressed. When the alarm is off, you will still hear
diagnostic and menu-related tones.
To turn the alarm off and on:
Click on the
button – which toggles the tones on or off – on the
SuperSet Menu.
The orientation of the 20X24 Roll-Up III cannot be changed.
