UtilityScan Quick Start Guide
Page 12
Section 2: Using ScanEZ
Application
Before collecting any data, you may want to configure
your UtilityScan. Tap ScanEZ from the App Carousel.
1
Choose Inspection Depth:
Tap Depth to toggle
through the pre-set depth settings. GSSI
recommends setting the inspection depth a little
deeper than required.
2
Set Soil Type:
GPR energy travels at different
speeds though different materials. Setting this close
to the material type through which you are scanning
will provide more accurate depth readings. These
names refer to the majority of material, not just the surface cover. See Appendix A in this guide for details.
3
Choose Color Table:
This will set the data display color. GSSI recommends that new users choose
Color Table 1.
4
Once you have configured the UtilityScan, tap Collect to begin collecting data.
Note:
The UtilityScan will detect the direction of first movement as “Forward.” This means that if you pull the
cart backwards as the first movement after tapping collect, the UtilityScan will collect data going backwards.
This will not change the direction which the data file scrolls on the screen.
Содержание UtilityScan
