GMR18, GMR20/40, GMR21/41 INSTALLATION GUIDE
*If you have purchased a GMR21/41, follow the standard radar mounting instructions.
Thank you for purchasing our SEAVIEW GARMIN MOUNT. Please read and understand the installation guide before
installing your SEAVIEW Garmin Mount. PYI always recommends an experienced industry professional install,
inspect, and certify the installation.
SEAVIEW GARMIN MOUNT
Our SEAVIEW Garmin mount was designed to fit the
GMR20
and
GMR40
28” radomes. If you have purchased a
GMR21/41
radome our mount will still work nicely. To properly install your
GMR18, GMR20
or
GMR40
to our
Seaview mount, you will be required to rotate the radome 180 degrees
.
Once installed the Garmin
GMR18/20/40
software
can simply adjust the radar heading by 180 degrees. To accomplish this, please follow the instructions in
your
GMR18, GMR20, GMR40 Owner’s Manual as duplicated on our 2nd page.
The following
illustrate
how the
GMR18, GMR2
0
and the GMR40 should look once installed to our SEAVIEW Garmin mounts.
See Fig.1, 2, 3 and 4.
Fig.3
CORRECT
INCORRECT
Fig.2
CORRECT
INCORRECT
SEAVIEW GARMIN MOUNT
INC.
12532 Beverly Park Road
Lynnwood, WA 98087
Office (425) 355-3669
Fax (425) 355-3661
Email: [email protected]
1-800-523-7558
www.pyiinc.com
GMR18, GMR20, GMR40 on Aft leaning Power Mount
Fig.4
. Shows the side profile of
GMR18, GMR20
or
GMR40
on
our SEAVIEW Aft leaning Power
Mount rotated 180 degrees for
CORRECT and not rotated for
INCORRECT.
GMR18, GMR20, GMR40 on Fwd leaning Power Mount
GMR18, GMR20, GMR40 on Pole Top Mount
Fig.1
Fig.5
. Shows the side profile of
GMR18, GMR20
or
GMR40
on
our SEAVIEW Forward leaning
Power Mount rotated 180
degrees for CORRECT and not
rotated for INCORRECT.
Fig.6
. Shows the side profile of
GMR18, GMR20
or
GMR40
on
our SEAVIEW Pole Top rotated
180 degrees for CORRECT and
not rotated for INCORRECT.
CORRECT
INCORRECT
Fig.4
CORRECT
INCORRECT
GMR18, GMR20, GMR40 on Pole Top Mount
Fig.7
. Shows the side profile of
GMR18, GMR20
or
GMR40
on
our SEAVIEW Mast platform
rotated 180 degrees for
CORRECT and not rotated for
INCORRECT.
