CHAPTER 8 OPERATION INTRODUCTION
51
8-7-16. Set / View the 3
rd
IP address
Select to S.IP3 and press ENTER key to access. Turn the Encoder to change the number and then press enter key
to confirm. It indicates the 3
rd
IP address which assigned by the server when DHCP ON.
The IP address has 4 numbers and each of them can be set from 1~254.
For example the IP address: 192.168.xxx.xxx
This S.IP3 function is to set the IP address to 192.168.0.xxx.
8-7-17. Set / View the 4
th
IP address
Select to S.IP4 and press ENTER key to access. Turn the Encoder to change the number and then press enter key
to confirm. It indicates the 4
th
IP address which assigned by the server when DHCP ON.
The IP address has 4 numbers and each of them can be set from 1~254.
For example the IP address: 192.168.0.xxx
This S.IP4 function is to set the IP address to 192.168.0.100.
8-7-18. Set / View the 1
st
Subnet MASK address
The Subnet MASK address has 4 numbers and each of them can be 0~255.
For example the Subnet MASK address: xxx.xxx.xxx.xxx
Select to S.MN1 and press ENTER key to access. Turn the Encoder to change the number and then press enter key
to confirm. It indicates the 1
st
netmask address which assigned by the server when DHCP ON.
