GSi PNEG-1295, Руководство по установке

Страница: 18 / 52

30" - 36" Platform Assembly
18 PNEG-1295 16" - 36" Platforms
RIGHT HAND DRIVE SETUP
LEFT HAND DRIVE SETUP
Fasten toeboards to floor sections in the posi-
tions as shown in Fig. 9-A for right hand drive,
and Fig. 9-B for left hand drive, using
3/8" x 1" bolts and whiz nuts. Make sure not to
Figure 9-B
Figure 9-A
1 Toeboard,
35.313
(HSP30122)
2 Toeboard, 88
(HSP30118)
3 Vertical Post, 47.5
(HSP30121)
4 Toeboard, 47
(HSP30123)
5 Toeboard, 60.25
(HSP30119)
6 Toeboard,
113.188
(HSP30120)
2 Toeboard, 88
(HSP30118)
5 Toeboard, 60.25
(HSP30119)
2 Toeboard, 88
(HSP30118)
1 Toeboard,
35.313
(HSP30122)
2 Toeboard, 88
(HSP30118)
3 Vertical Post, 47.5
(HSP30121)
4 Toeboard, 47
(HSP30123)
5 Toeboard, 60.25
(HSP30119)
6 Toeboard,
113.188
(HSP30120)
2 Toeboard, 88
(HSP30118)
5 Toeboard, 60.25
(HSP30119)
2 Toeboard, 88
(HSP30118)
Toeboards
tighten hardware until assembly is complete.
Leave hardware out of end holes in toeboards
and the holes at the support channels, the
vertical posts will mount using these holes.