GSi PNEG-1295, Руководство по установке

Страница: 11 / 52

16" - 24" Platform Assembly
11 PNEG-1295 16" - 36" Platforms
RIGHT HAND DRIVE SETUP
LEFT HAND DRIVE SETUP
Place outside floor sections (#1 & #3) on sup-
port channels in location shown below and
fasten using 3/8" x 1" bolts and whiz nuts, for
right hand drive see Fig. 2-A, for left hand drive
Figure 2-A
Figure 2-B
1 Decking Side
Access Weldment
(HSP16010)
2 Decking Middle
Weldment
(HSP16015)
3 Decking Drive
Side Weldment
(HSP16006)
1 Decking Side
Access Weldment
(HSP16010)
2 Decking Middle
Weldment
(HSP16015)
3 Decking Drive
Side Weldment
(HSP16006)
Floor Sections
see Fig. 2-B. Fasten middle floor section to the
two outside floor sections with 3/8" x 1" bolts
and whiz nuts. Make sure not to tighten the
hardware until assembly is complete.