GSi PNEG-1295, Руководство по установке

Страница: 10 / 52

16" - 24" Platform Assembly
10 PNEG-1295 16" - 36" Platforms
When laying out the ladder, safety cage, and
platforms be sure to always start from the head
service platform and work your way down the
leg. Keep in mind a rest platform needs to be
located at every 30' of vertical descent to com-
ply with OSHA Standards.
Take time now and review all instructions and
drawings before attempting to assemble the
platforms. Layout all parts for easy identifica-
tion. Determine if your equipment is left or right
hand shaft. The support channels will mount
in the same location for right hand or left hand
drive setup. The support channels will extend
same distance on each side of the head. Start
the
head service platform assembly by at-
taching two support channels to the head
platform clips. Use 3/8" x 1" bolts and whiz
nuts. (See Figure 1.)
Figure 1
Head Ser vice Platform