Grundig GRT-K1104A, Руководство пользователя

Страница: 99 / 138

3) Click the “Apply” button to save the settings.
4) You can click the “Refresh” button to get the latest status of the port mapping.
Manual Mapping:
If your router does not support the UPnP function, perform the following steps to map the port manually in an
easy way.
Before you start:
Make sure the router supports the configuration of the internal port and the external port in the interface of
Forwarding.
Steps:
1. Enter the Network Settings interface: Menu> Con fi guration> Network
2. Select the “NAT” tab to enter the port mapping interface.
3. Leave the “Enable UPnP” checkbox unchecked.
4. Click on the “(pencil on a written sheet)” symbol to activate the External Port Settings dialogue box. Con fi gure
the external port No. For server port, http port, RTSP port and https port respectively.
NOTE: The value of the RTSP port No. Should be 554 or between 1024 and 65535, while the value of the other
ports should be between 1 and 65535 and the values must be different from each other. If multiple devices are
configured for the UPnP™ settings under the same router, the value of the port No. For each device should be
unique.
5. Click "OK” to save the setting for the current port and to return to the upper-level menu.
6. Click the “Apply” button to save the settings.
7. Enter the virtual server setting page of router; fi ll in the blank of the Internal Source Port with the internal
port value, the blank of External Source Port with the external port value, and other required contents.
NOTE: Each item should be corresponding with the device port, including server port, http port, RTSP port and
https port.
99 English