Grundig GRT-K1104A, Руководство пользователя

Страница: 126 / 138

- There is an audible warning sound (“Di-Di-Di-DiDi”) after a new bought NVR/DVR starts up.
Possible Reasons:
a) No HDD is installed in the device.
b) The installed HDD has not been initialised.
c) The installed HDD is not compatible with the NVR/DVR or has broken down.
Steps:
1.Verify whether at least one HDD is installed in the NVR/DVR.
1) If not, please install the compatible HDD.
NOTE: Please refer to the “Quick Operation Guide” for the HDD installation steps.
2) If you don’t want to install a HDD, select “Menu> Con fi guration> Exceptions”, and uncheck the Audible
Warning checkbox of “HDD Error”.
2.Verify that the HDD is initialised.
1) Select “Menu>HDD>General”.
2) If the status of the HDD is “Uninitialized”, please check the checkbox of the corresponding HDD and click the
“Init” button.
3. Verify the HDD is detected or is in good condition.
1) Select “Menu> HDD> General”.
2) If the HDD is not detected or the status is “Abnormal”, please replace the dedicated HDD according to the
requirement.
4. Check if the fault is solved by step 1 to step 3. If it is solved, fi nish the process. If not, please contact the
manufacturer of the IP camera.
126 English