Grundig GRT-K1104A, Руководство пользователя

Страница: 111 / 138

NOTE: If you want to use the HDD even when S.M.A.R.T. checking failed, you can check the checkbox of the
“Continue to use the disk when self-evaluation failed” item.
Bad Sector Detection:
Steps:
1. Click the “Bad Sector Detection” tab.
2. Select the “HDD No.” in the dropdown list you want to con fi gure, and choose “All Detection” or “Key Area
Detection” as detection type.
3. Click the “Detect” button to start the detection.
And you can click on the “Error info” button to see the detailed damage information. And you can also
pause/resume or cancel the detection.
13.8. Con fi guring HDD Error Alarms
You can configure the HDD error alarms when the HDD status is “Uninitialized” or “Abnormal”.
Steps:
1. Enter the Exception interface: Menu> Con fi guration> Exceptions
2. Set the Exception Type to “HDD Error” in the dropdown list.
3. Click the checkbox(s) below to select the HDD error alarm type(s), as shown below.
The alarm type can be set to: Audible Warning, Notify Surveillance Center, Send Email and Trigger Alarm Output.
Please refer to Chapter “Setting Alarm Response Actions”.
4. When the “Trigger Alarm Output” is selected, you can also select the alarm output to be triggered from the
list below.
5.Click the “Apply" button to save the settings.
111 English