Grundig GRT-K1104A, Руководство пользователя

Страница: 50 / 138

II. Click the “Apply” button to validate the settings.
3. (Optional) If the settings can also be used for other channels, click “Copy”, and then choose the channel to
which you want to copy.
4. Click “Apply” to save the settings.
8.3. Configuring the Motion Detection Recording
Follow the steps to set the motion detection parameters. In live view mode, once a motion detection event takes
place, the NVR/DVR can analyse it and perform many actions to handle it. Enabling the motion detection function
can trigger certain channels to start recording, or trigger full screen monitoring, audio warning, notifying the
surveillance center and so on. In this chapter, you can follow the steps to schedule a recording which is triggered
by the detected motion.
Please note: Only cameras using Grundig-1 protocol can be configured for motion recording with the NVR/DVR.
Cameras using Grundig-2, ONVIF or any other protocol need to be configured directly in the camera OSD.
Steps:
1. Enter the Motion Detection interface: Menu> Camera> Motion
2. Con fi gure the Motion Detection:
1) Choose the camera you want to con fi gure.
2) Check the checkbox after “Enable Motion Detection”.
3) Drag and draw the area for motion detection by mouse. If you want to set the motion detection for all the area
shot by the camera, click “Full Screen”. To clear the motion detection area, click “Clear”.
50 English