Grundig GRT-K1104A, Руководство пользователя

Страница: 39 / 138

7.2.1. Customising the Presets
Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takes place.
Steps:
1. Enter the PTZ Control interface: Menu> Camera> PTZ
2. Use the directional button to wheel the camera to the location where you want to set the limit, and click the
“Left Limit” or “Right Limit” button to link the location to the corresponding limit.
NOTE: A speed dome starts a linear scan from the left limit to the right limit, and you must set the left limit on the
left side of the right limit, as well the angle from the left limit to the right limit should be no more than 180º.
2. Use the directional button to wheel the camera to the location where you want to set the limit, and click the
“Left Limit” or “Right Limit” button to link the location to the corresponding limit.
NOTE: A speed dome starts a linear scan from the left limit to the right limit, and you must set the left limit on the
left side of the right limit, as well the angle from the left limit to the right limit should be no more than 180º.
7.2.2. Calling the Presets
This feature enables the camera to point to a specified position such as a window when an event takes place.
Steps:
1. Click the button “PTZ” in the lower-right corner of the PTZ setting interface;
Or press the “PTZ” button on the front panel or click the “(PTZ Control)” icon in the quick setting bar, or select
the “PTZ” option in the right-click menu to show the PTZ control panel.
2. Choose a Camera in the dropdown list.
3. Click the “>” button to show the general settings of the PTZ control.
39 English