141 ENGLISH
You can use this icon
to clear the existing virtual line and to re-draw it.
Note:
Up to 4 rules can be configured.
8.
Click <Apply> to save the settings.
10.6 Region Exiting Detection
The <Region Exiting Detection> function detects people, vehicles or other objects which exit from a pre-
defined virtual region and certain actions can be taken when the alarm is triggered.
Note:
Please refer to the
Chapter 9.5 Region Entrance Detection
for operating steps to configure the <Region
Exiting Detection>.
Up to 4 rules can be configured.
10.7 Unattended Baggage Detection
This function is not available in all models.
The <Unattended Baggage Detection> function detects objects left behind in the pre-defined region
such as baggage, a purse, dangerous materials, etc. and a series of actions can be taken when the
<Alarm> is triggered.
Note:
Please refer to the
Chapter 9.4 Intrusion Detection
for operating steps to configure the <Unattended Baggage
Detection>.
The
<Threshold>
[5s-20s] in the <Rule Settings> defines the time for which an objects is left behind in the
region. If you set the value as <10>, then the <Alarm> is triggered after the object was left and has stayed in
the region for 10 seconds.
The
<Sensitivity>
defines the similarity degree of the background image. Usually, when the sensitivity is high,
a very small object left in the region can trigger the alarm.
Up to 4 rules can be configured.
10.8 Object Removal Detection
This function is not available in all models.
The <Object Removal Detection> function detects the objects removed from the pre-defined region
such as the exhibits on display and a series of actions can be taken when the <Alarm> is triggered.
