Grundig 40VLE630BH, Руководство по обслуживанию

Страница: 37 / 180

TP CHASSIS / TELEVISION
37 September 2011
5.7.4. Connecting External Data Storage Devices
Before connecting the data medium, switch the television to stand-by with »8«.
Connect the device and then switch the television on again. Before disconnecting the
data medium, the television must first be switched to standby, otherwise files can be
damaged.
Note: »USB1« interface of the television supports 500mA current according to the
USB standard. Devices such as external hard disk and etc. that consume more
power can only be connected to the »USB2« interface of the television.
If you are using a power cable for the external hard disk that you have connected to
the »USB2 (HDD)« interface, then the power cable of the external hard disk must
also be unplugged when the TV is turned off.
You must not disconnect the USB Device from the TV while a file on the USB Device
is being read by the TV.
A bi-directional data transfer as defined for ITE (Information Technology Equipment)
devices in EN 55022/EN 55024 is not possible.
USB transfer is not an operating mode in itself. It is only an additional function.
1 Connect the »USB2 (HDD)« interface of the television and the corresponding
socket on the data device (external hard drive, digital camera, card reader, or MP3
player) using a USB cable; or insert the memory stick in »USB1« socket of television.
2 Confirm the » « display with » « (green).
– The file browser appears.
5.7.5. DivX VOD
DivX® is a digital picture format created by DivX, Inc. This is a
DivX Certified® device that plays DivX video. For more
information to convert your files to DivX image files and for
software tools, please visit divx.com.
DIVX VIDEO ON DEMAND, To play DivX Video-on-Demand (VOD) films that you
purchase, you should have this DivX Certified® device registered. To receive your
registration code, navigate to your device’s USB settings menu and DivX VOD
section. For more details about registration, please visit the address vod.divx.com.
5.8. DIGILINK & CEC
Your television is equipped with DIGI LINK feature. This feature
utilizes CEC (Consumer Electronics Control) protocol. CEC
allows you to make an HDMI connection between your TV and
DVD player, STB or video recorder and control such equipments
with the remote control of the television. This feature must also
be supported by the device you connect.
Switching on the external device from standby mode:
When you switch on your external device (e.g. DVD player) from standby mode, your
television will be turned on from standby mode as well and it will switch to the HDMI
source that the external device is connected to.
Selecting the HDMI source from the television: