Grundig 40VLE630BH, Руководство по обслуживанию

Страница: 131 / 180

Step 1:
In the software package supplied in the Target folder, copy into the USB memory.
Step 2:
Insert the USB memory to the USB port that is located side of the TV.
Step 3:
Holding down any key on the keypad with your finger (not releasing the key), cut power of TV
and re-issued it again.
Step 4:
You can release the key after waiting approximately 5 second.
Step 5:
If the software is installed smoothly, the TV will be opened with the new software
automatically.
b. Software installation with the help of the ISP Tool
Initial Condition: Not important
Step 1:
Given with software package, Target folder should be copied without any changes
into the USB memory.
Step 2:
Insert the USB memory to the USB port that is located side of the TV.
Step 3:
After MStar ISP tool connects to the TV, a terminal control program, such as minicom or
hyperterminal, is executed.
Settings:
Baud: 115200
Databits: 8
Stopbits: 1
Parity: None