Grundig 40VLE630BH, Руководство по обслуживанию

Страница: 23 / 180

TP CHASSIS / TELEVISION
23 September 2011
receiving maximum four satellites while DISEqC 1.1 allows for receiving maximum 16
satellites at the same time.
7. Select LNB Selection tab with . Select the satellite that corresponds to the
relevant position with .
8. Press ● (Red) for Auto Tuning. AUTO CHANNEL SEARCH menu will be displayed.
9. Select Scan Mode with . Press B / A to select whether you want to search
for only free digital television channels (Free), only scrambled digital television
channels (Scramble) or both (Free + Scramble).
10. Select Service Type with . Press to select whether you want to
search for only television channels (TV), only radio channels (Radio) or both (Radio +
TV).
11.Press
● (Red) to start searching. Results menu appears and the search for TV
stations begins. Search may take several minutes
depending on the number of television
stations received. The search ends when the
PROGRAM TABLE appears. If a second
satellite is set,
perform the following steps to set other
television channels. Press M to open the
menu. Select SOURCE SETUP with
and press OK. Then, select AUTOMATIC
CHANNEL SEARCH with D / C and press
OK. In Select Satellite tab, press OK and
select the satellite with or .
Press ● (Red) to start searching. Repeat
other settings starting from Step 7.
5.1.3. Digital Satellite Channel Settings
Automatic tuning of digital satellite channels:
New satellite channels are added or satellite data is changed frequently. Therefore,
we recommend you to run auto search function from time to time. LNB settings
should be made before automatic search.
1.Press M.
2.Select SOURCE SETUP with and press OK. SOURCE SETUP menu will
be displayed.
3. Select Source with and press OK. Select Satellite with or
and press OK.
4. Select Automatic Channel Search with and press OK. Menu will be
displayed.
5. Go to Select Satellite with and press OK. SELECT SATELLITE menu will
be displayed.