Grundig 40VLE630BH, Руководство по обслуживанию

Страница: 26 / 180

TP CHASSIS / TELEVISION
26 September 2011
that supports HDMI 1.4. Side by Side and Top Bottom options do not appear. Turn of
the function by setting it to »Off« with »3D« button.
5.2.2. 3D Picture Settings
1 Open the menu with »i« button.
2 Select »PICTURE SETTINGS« menu with »V« or »
Λ « and confirm with » ● « Menu
will be displayed.
3 Select »3D SETUP« with »
Λ « and confirm with » ● « .
– »3D SETUP« menu will be displayed.
5.2.3. Adjusting 2D>3D Effects
When you change 2D broadcasting to 3D, you can adjust the most suitable effect
depending on your personal preferences.
1 Select »Effect mode« with »V« or »
Λ « and set it to »On« with »<« or »>«.
– »3D Perspective« and »Depth« options are activated.
2 Select »3D Perspective« with »V« or »
Λ « and adjust with »<« or »>«.
3 Select »Depth« with »V« or » Λ « and select the picture setting as »Low«,
»Medium« or »High« with »<« or »>«.
4 Press »i« to end the setting.
5.2.4. Left-Right Correction
When Frame Packing mode is enabled in HDMI source, 3D perception may
disappear in 3D films or 3D games due to a synchronization shift arising from HDMI
signal. You may correct 3D perception with this feature.
1 Select »LR Correction« with »V« or » Λ «.
2 Press »<« or »>« to switch the function »On«.
Note:
Turn off the function by setting it to »Off« with »<« or »>«.
3 Press »i« to end the setting.
5.2.5. Formats supported with HDMI 1.4
With HDMI 1.4, your TV can recognize and play 3D contents. To exit 3D mode, turn
off the function by setting it to »Off« with »3D« button. Formats supported in 3D
mode with HDMI 1.4 are provided in the following table.