Grundig 40VLE630BH, Руководство по обслуживанию

Страница: 28 / 180

TP CHASSIS / TELEVISION
28 September 2011
»V« or »
Λ
« and confirm with »
●
«
– »NETWORK APPS« menu will be displayed.
3 Select »Connection« option with »V« or »
Λ « and select »Wired« with »<« or »>«.
4 Select »Connection Type« option with »V« or » Λ « and select »Auto« with »<« or
»>«.
5 Select »Connect« with »« (red) button to establish the modem connection.
– »Connecting ... Please wait« message will be displayed.
6 Press » « (green) button to make sure that the network connection is established
with the current settings.
– »Testing ... Please wait« message will be displayed and if it is connected
successfully, »Connection to Gateway : Success«, »Internet Connection: Success«
message will be displayed. Press »i« to end the setting.
Note: If you do not have a dynamic network, follow the instructions in manual
connection section.
5.3.4. Manual Connection
Certain networks require Static IP address. If your network requires a Static IP
address, you must enter the »IP Address«, »Netmask«, »Gateway« and »DNS«
values manually. You can obtain your »IP Address«, »Netmask«, »Gateway« and
»DNS« values from your Internet Service Provider (ISP).
1 Open the menu with »i« button.
2 Select »NETWORK APPS« menu with »V« or »
Λ « and confirm with » ● «
»NETWORK APPS« menu will be displayed.
3 Select »Connection Type« option with
»V« or »
Λ « and select »Wired« with »<«
and »>«.
4 Select »Network Configuration« option
with »V« or »
Λ « and select »Manual«
with »<« and »>«.
- »IP Address«, »Netmask«, »Gateway«
and »DNS« options are active.
5 Select »IP Address« with »V« and
press »
● «. Enter the IP address with
»1…0« and press » « (green) to save
the value.
6 Select »Netmask« with »V« and press
»
● «. Enter the Netmask address with
»1…0« and press » « (green) to save
the value.
7 Select »Gateway« with »V« and press
»
● «. Enter the Gateway address with
»1…0« and press » « (green) to save
the value.
8 Select »DNS« with »V« and press »
● «. Enter DNS address with »1…0« and press
» « (green) to save the value.
9 Select »Connect« with » « (red) button to establish the modem connection.
– »Connecting ... Please wait« message will be displayed.