14
Notes to table 2:
Note 4*:
•
The ALARM settings are only available when
MEASUREMENT has been enabled (using the service code).
•
The alarm relay is activated in case previously set alarm
values for chlorine dioxide are exceeded or not reached, the
maximum dosing time is exceeded, and in case of a fault.
Note 5*:
•
The WATER FLOW METER submenu only appears if a
WATER FLOW METER is enabled (using the service code).
•
When connecting a contact water meter, the pulse rate and
the maximum flow are entered during commissioning. The
control system thus calculates the number of pulses per
second. This value corresponds 100 % to the disturbance
variable as a control parameter.
•
When connecting a flow meter, the measuring range of the
incoming current signal is entered during commissioning.
This is used as the basis for a control parameter.
Users can view the current input value of the water flow meter or
flow meter as well as the pulses/second or value in mA and the
calculation in percent. See section
input value for the water flow meter
.
The value is also displayed if the defined input values are
exceeded or not reached (a water flow meter malfunction is
visible here).
3. Transport and packaging
3.1 Unpacking the device(s)
Number of packing units: 1 box.
Procedure:
1. Unpack the device.
2. Unpack the cover.
3. Unpack the measuring cell, if supplied.
4. Unpack the extension modules, supplied.
5. Retain the original packaging in order to return the device for
servicing.
6. Check the device(s) for transport damage (especially hoses
and lines).
3.2 Measures in case
of transport damage
In case
of transport damage:
1. Pack the device in its original packaging.
2. Inform the forwarder of the transport damage.
3. Return the device to the supplier.
Warning
Increased risk of damage to equipment and
personal injury as a result of operating faults
due
to transport damage.
Do not shake, crush or drop the box. Open the
packaging carefully.
Do not use a sharp or pointed blade.
Carefully remove the device from the box.
Do not bend the hoses and cables.
Box
Dimensions
L x W x H
[mm]
Contents
Weight
(gross)
[kg]
Weight
(net)
[kg]
1
900 x 900 x
518
Device with
cover, hoses,
screws,
accessories
30
26
