10
GROUND ZERO
Remote control (Dual Zone)
Button
Function
MODE
Change rear zone modes.
0~9
Press digit buttons to go directly the intended
track.
6
/
=
Short press to play or pause; long press for 2
seconds to use as ENTER function.
Cursor
up/down
Press to move cursor up/down.
蔗
<< /
>>
蔗
Short press to go to previous/next track, long
press to faster backward/forward.
RPT
Press to select repeat functions.
AUDIO
Select audio modes for DVD/VCD.
SUB
Select subtitle languages of DVD if the disc
support this function.
MUTE
Press it to mute the sound of rear zone.
MENU
Press it to go to DVD root menu if the disc
support this function.
Front Connections
AV IN
The AV IN (3.5 inch connection in the front) is a connection with which you can connect external audio
and video devices through their headphone or AUX output with this device. The audio or video tracks
played back on these devices are then put out through the car speakers and seen on screen. This is how
you can e.g. play back audio files that you have saved on your cell phone, minidisk, iPod®, tape
recorder, Video Camera or Game console. To connect external audio / video devices with the unit, you
will need to use the provided
Front AV-In Adapter cable (Video / Audio right + left) to 3.5 mm jack
plug. First connect this cable to the unit - and then the headphone connection or AUX / Video output of
your playback device. Now you can start the playback. Set the volume of the playback device to a
medium level and subsequently regulate the volume with your device. If the playback source of the
device has not been set to AUX yet, please press the “MODE” button until AUX appears on the display.
Please note that you only can use the rear AV-in OR the front AV-in. It is not possible to use both inputs
parallel.
SD/MMC Card slot
The SD-Card slot allows to use a SD/MMC and SD-HC card with a max. capacity of 8GB.
It is possible to playback audio, video and picture files.
We can not guarantee that the unit accept every type of SD-card. If you realise a malfunction with a SD-
Card, please try to use a different card from a different vendor.
11
GROUND ZERO
USB Slot
The USB-slot allows to use a USB 2.0 Stick with a max. capacity of 8GB.
It is possible to playback audio, video and picture files.
We can not guarantee that the unit accept every type of USB-Stick. If you realise a malfunction with a
USB-Stick, please try to use a different card from a different vendor.
Operation of the monitor
Open the monitor by briefly pressing the “OPEN” button.
Now the monitor is opened automatically and fixed in the
flipped-open position. The monitor can be closed again by
pressing the “OPEN” button again. If the monitor doesn’t
close as a result, it may not be in the correct position.
Then there will be the error message
“ERROR!! – MONITOR NOT CENTERED”
Note: Before beginning to drive, please familiarize
yourself sufficiently with the device and avoid
longer entries during the drive for your own safety!
Swiveling the monitor outward
To better read and operate the screen, it’s possible to swivel the monitor of the device by about 30° to
the right and left. For this, first open the monitor with the “OPEN” button as described above. Then you
can swivel the monitor by pulling it towards you carefully from the lower right or left edge of the screen.
Never use force during the process, otherwise you might damage the device. To swivel the monitor back,
just press it back into the original position.
Setting the monitor in/out position
Press IN/OUT button to set the monitor in/out position (the distance of the monitor to the installation
slot).
Tilting the monitor
Press TILT button to set the slant of the monitor.
