32
GROUND ZERO
Exiting the settings
To exit the settings menu again, please navigate to the last item (X) in the bar on top.
The menu item “exit menu” will appear. Press the five-way multifunction button once to exit the menu.
You can also exit the menu at any time by pressing the SETUP button.
BLUETOOTH Operation
The unit is compatible with Bluetooth international standard wireless communication technology
V1.2 & V2.0 EDR and supports HSP, HFP, A2DP, AVRCP. The unit has excellent software controlled
ECHO cancellation with noise elimination you can place a hands-free call using a Bluetooth
compatible mobile phone.
Pairing
Start searching a new Bluetooth device according the manual of your Mobile Phone. As soon as your
phone finds "
CAR RADIO
", select "
CAR RADIO
” and key in the code "
0000
" and confirm ok.
The Phone and the unit will now start pairing and
the device paring is finished. After a Bluetooth
connection is made between the Phone and the unit,
the BT indication will be ON and the icon of
“Bluetooth” in the main menu will light, click
“Bluetooth” to enter Bluetooth mode.
Suggestion:
1. Set "My phone's visibility" as "show to all"
2. Select "Yes" in "Set as authorized."
Auto Connecting
When turning on the unit, the last paired phone will be connected to the device via Bluetooth
automatically, after searching about one minute, if the device cannot find the paired phone, it will stop
searching. When in standby mode (unconnected), short press the Bluetooth button on the Remote
Control to activate the auto-connect function and the device will start searching the last paired phone.
(Example, when you were connected, but you take the mobile phone more than 10 meters away from
the unit, the Bluetooth connection will be disconnected. Press the Bluetooth button on the Remote
Control to activate auto connecting function after you get back.)
BLUETOOTH pairing code: 0000
33
GROUND ZERO
Key Pad Dial Mode
Make a call
After connecting your mobile phone BT to the device BT, press BLUETOOTH button on remote control or
press BLUETOOTH in SOURCE MENU to enter into key pad dial mode.
To make a call, press digit buttons on remote control or on-screen menu to enter telephone number
(when you enter a wrong number, press “C” button on remote control or on on-screen menu to delete
digit one by one), and then press the green
button to dial the number.
Redial
In key pad dial mode press the green
button once to redial last number.
Voice Dial Mode
In key pad dial mode, click on the speaker icon on screen or press cursor up/down button on
remote control to enter the voice dial mode. After entering this mode, speak out the recorded voice tag,
after finding out the matching voice tag, the number will be dialed automatically.
(
Note
: Voice dial need to be supported by your mobile phone).
