OM-TDB/TDBC-CE 3
USE COULD RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE TO THE EQUIPMENT AND WILL
VOID WARRANTY.
WARNING: AVOID ALL DIRECT CONTACT WITH HOT EQUIPMENT SURFACES. DIRECT SKIN CONTACT COULD
RESULT IN SEVERE BURNS.
WARNING: AVOID ALL DIRECT CONTACT WITH HOT FOOD OR WATER IN THE KETTLE. DIRECT CONTACT COULD
RESULT IN SEVERE BURNS.
CAUTION: DO NOT OVER FILL THE KETTLE WHEN COOKING, HOLDING OR CLEANING. KEEP LIQUIDS A
MINIMUM OF 2-3” (5-8 CM) BELOW THE KETTLE BODY RIM TO ALLOW CLEARANCE FOR STIRRING,
BOILING AND SAFE PRODUCT TRANSFER.
WARNING: TAKE SPECIAL CARE TO AVOID CONTACT WITH HOT KETTLE BODY OR HOT PRODUCT WHEN
ADDING INGREDIENTS, STIRRING OR TRANSFERRING PRODUCT TO ANOTHER CONTAINER.
WARNING: WHEN TILTING KETTLE FOR PRODUCT TRANSFER:
1) WEAR PROTECTIVE OVEN MITT AND PROTECTIVE APRON.
2) USE CONTAINER DEEP ENOUGH TO CONTAIN AND MINIMIZE PRODUCT SPLASHING.
3) PLACE CONTAINER ON STABLE, FLAT SURFACE, AS CLOSE TO KETTLE AS POSSIBLE.
4) STAND TO LEFT OR RIGHT SIDE OF KETTLE WHILE POURING. DO NOT STAND DIRECTLY IN
POUR PATH OF HOT CONTENTS.
5) POUR SLOWLY, MAINTAIN CONTROL OF KETTLE, AND RETURN KETTLE BODY TO UPRIGHT
POSITION AFTER CONTAINER IS FILLED OR TRANSFER IS COMPLETE.
6) DO NOT OVER-FILL CONTAINER. AVOID DIRECT SKIN CONTACT WITH HOT CONTAINER AND ITS
CONTENTS.
CAUTION: KEEP FLOORS IN FRONT OF KETTLEWORK AREA CLEAN AND DRY. IF SPILLS OCCUR, CLEAN
IMMEDIATELY, TO AVOID SLIPS OR FALLS.
WARNING: FAILURE TO CHECK SAFETY VALVE OPERATION PERIODICALLY COULD RESULT IN PERSONAL
INJURY AND/OR DAMAGE TO EQUIPMENT.
WARNING: WHEN TESTING, AVOID ANY EXPOSURE TO THE STEAM BLOWING OUT OF THE SAFETY VALVE.
DIRECT CONTACT COULD RESULT IN SEVERE BURNS.
WARNING: BEFORE REPLACING ANY PARTS, DISCONNECT THE UNIT FROM THE ELECTRIC POWER SUPPLY.
WARNING: KEEP WATER AND SOLUTIONS OUT OF CONTROLS AND ELECTRICAL EQUIPMENT. NEVER SPRAY
OR HOSE THE SUPPORT HOUSING OR ELECTRICAL CONNECTIONS.
ROHS STATEMENT: UNIFIED BRANDS AS A MANUFACTURER OF ARTICLES UNDER THE GROEN AND CAPKOLD BRANDS,
CONFORMS TO THE EUROPEAN PARLIAMENT & COUNCIL DIRECTIVES, 2011/65/EU RESTRICTION OF HAZARDOUS MATERIALS
(ROHS). CONFORMANCE IS BASED ON DECLARATIONS RECEIVED FROM OUR SUPPLIERS THAT THE PRODUCTS AND RAW
MATERIALS THEY SUPPLY COMPLY WITH THE EUROPEAN PARLIAMENT & COUNCIL DIRECTIVES, 2011/65/EU RESTRICTION
OF HAZARDOUS MATERIALS (ROHS) (INCLUDING LEAD AND CADMIUM REQUIREMENTS). HOWEVER, WE DO NOT ROUTINELY
ANALYZE THEIR PRODUCTS FOR THE ABOVE SUBSTANCES NOR DO WE REQUIRE OUR RAW MATERIALS SUPPLIERS TO DO SO.
WEEE DECOMMISSIONING STATEMENT: THE ARTICLES MANUFACTURED BY UNIFIED BRANDS ARE NOT LISTED IN ANNEX 1 OF
DIRECTIVE 2012/19/EU WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE). HOWEVER, WE STRONGLY SUPPORT THE
SPIRIT OF THE DIRECTIVE AND RECOMMEND THAT, AT THE TIME OF DECOMMISSIONING OF THE ARTICLE, YOU RESPONSIBLY
DISPOSE OF OR RECYCLE ALL COMPONENTS OF THE EQUIPMENT. BY SEPARATING AND RECYCLING YOUR WASTE EQUIPMENT
AT THE TIME OF DISPOSAL YOU WILL HELP TO CONSERVE NATURAL RESOURCES AND ENSURE THAT THE EQUIPMENT
IS RECYCLED IN A MANNER THAT PROTECTS HUMAN HEALTH AND THE ENVIRONMENT. ELECTRICAL CONTROL PANELS,
ELECTRICAL COMPONENTS AND MOTORS HAVE MATERIALS THAT MUST NOT BE DISCARDED INTO COMMON MUNICIPAL
WASTE DISPOSAL. THEY SHOULD BE SENT TO A PROPER ELECTRICAL WASTE FACILITY FOR DISPOSAL. OTHER MATERIALS,
SUCH AS METALS, HAVE AN INTRINSIC VALUE IN THE RECYCLED METALS MARKET AND YOU SHOULD BE ABLE TO RECOVER
THEIR VALUE BY CONTACTING A RECOGNIZED METAL RECYCLING FACILITY AND ARRANGING FOR APPROPRIATE RECYCLING.
IMPORTANT - READ FIRST - IMPORTANT
