20
OM-CBE-10G
Cleaning
WARNING
WHEN HANDLING CLEANER OR DETERGENT
ALWAYS WEAR SUITABLE GLOVES AND
PROTECTIVE SAFETY GLASSES. FAILURE
TO DO SO CAN CAUSE SERIOUS BURNS.
TAKE PRECAUTIONS TO KEEP CHEMICALS
FROM CONTACTING YOUR SKIN. KEEP
THE CHEMICAL(S) AWAY FROM THE
DOOR GASKET AND THE FRONT CONTROL
PANEL GASKET. FAILURE TO DO SO CAN
DRASTICALLY REDUCE GASKET LIFE.
WARNING
AFTER EACH CLEAN CYCLE CHECK THE
INTERIOR TO MAKE CERTAIN THAT ALL
CLEANING RESIDUE HAS BEEN RINSED OFF
BEFORE INSTALLING RACKS OR RESUMING
COOKING.
Cleaning
It is best to clean the oven when it is at room temperature. However, it may
be cleaned right after cooking.
1. First turn off whatever cooking mode is currently on by pushing its button. For
example, if the oven is in steam mode (the STEAM indicator is on) push the
STEAM button. The indicator will go out showing that no cooking mode is currently
selected.
2. If the oven is off turn it on with the power switch.
3. Push CLEAN.
4. The message OPEN DOOR appears in the display. When the door is open the
message changes to SPRAY CLEANER AND CLOSE DOOR.
5. When the door is closed the message changes to CLEAN MODE SOAK TIME and
the oven rests to allow the cleaner to work.
6. A counter in the second line of the display shows the number of seconds remaining
in each timed cleaning step.
7. Then the rinse valve opens (message CLEAN MODE RINSE TIME appears in the
display) to flush the cleaner off the cavity walls.
8. This is followed by a drain period (CLEAN MODE DRAIN TIME appears in the
display) followed by the rinse.
9. When this is complete the message CLEAN COMPLETE TIME LEFT is displayed and
the oven beeper sounds four times at 15 second intervals with a new message
displayed as OPEN DOOR. The oven turns itself off at the end of the fourth beeper
sound.
10. If the oven is hot at the beginning of the soaking period the message OPEN DOOR
TO COOL OVEN is displayed. While the door is open the message COOLING is
displayed.
11. When the oven has cooled sufficiently to allow it to continue the message CLOSE
THE DOOR is displayed.
12. The cleaning cycle starts with the message OPEN DOOR AND REMOVE RACKS.
At any time during the cleaning cycle the user may open the door and spray more
cleaner in the cavity. When the door is closed the cycle starts over with the soaking
period followed by the two rinses.
Once a cleaning cycle has been started all other cooking modes are inactive (locked
out). The cleaning cycle must run to completion before the oven will operate in the
cooking modes.
The oven may be turned off at any time during the cleaning cycle. When the oven is
turned on again it remembers that it was interrupted in the middle of the cleaning
cycle. The message PUSH CLEAN TO FINISH CLEANING appears in the display. No other
cooking mode buttons will operate. When the clean cycle is complete the oven turns off.
The oven can then be turned on and operate in any mode.
Содержание (2) CBE-10G
Страница 23: ...OM CBE 10G 23 NOTES...
