Groen (2) CBE-10G, Руководство оператора

Страница: 18 / 24

18 OM-CBE-10G
Sequence of Operation
5. Door
When the door is open for five minutes or more the burners are turned off. As soon
as the door is closed the burners resume normal operation.
Whenever the door is open the cavity fan is stopped and the timer (if running) is
paused.
During the clean cycle the rinse water is stopped whenever the door is open.
6. Cavity fan
The cavity fan normally operates at high speed. Pushing the Fan Speed LO button
selects the low speed. Whenever the cooking mode is changed the fan speed is
automatically set to high.
7. Timer
When the power switch is turned on the timer is paused, the colon (:) in the TIMER
display does not flash to indicate pause. Adjust the TIMER knob (the lower knob)
for the desired cooking time in hours and minutes. Push START to allow the timer
to run, the colon flashes indicating that it is running. It also locks the temperature
knob. At the end of the timing period the beeper sounds and the CANCEL indicator
flashes. Push CANCEL to stop the beeper. Note that this is all the timer does; it is
a simple kitchen timer. It does not stop any cooking process, it simply alerts the
operator that the timer has timed out.
8. Light
When the LIGHT button is pushed the door lights turn on to illuminate the cavity.
When the button is released the lights stay on for five seconds and automatically
turn off.
9. Condensate spray
When a steam-water valve is first turned on a large puff of steam may be created
if the water is sent to a hot reservoir. Part of this puff of steam goes out the
overflow drain. During this time the condensate spray is turned on to condense
the steam and cool drain water.
When a drain valve is opened it discharges hot water into the oven drain. During
this time the condensate spray is turned on for a longer period to cool the drain
water.
The condensate spray is turned off when not draining to conserve water.
10. Spray Nozzle
The spray nozzle is used in the clean cycle to rinse the cavity walls. Both of the
nozzles should be oriented with the flats vertical and the slots up. (see photo)
Wash spray nozzle.