Grizzly G0911, Руководство пользователя

Страница: 69 / 100

To avoid damaging laser tube, remove tube
from saddles ONLY when ready to place in
container. Handle tube carefully in a pre-
planned manner to prevent tube contacting
machine cabinet.
Figure 97. Laser tube saddle components.
Figure 96. Laser tube component locations.
x 4
Model G0911–G0914 (Mfd. Since 05/21)
-67-
11. Install caps or tape on (2) open water spouts
to keep laser tube sealed and free from con-
taminants and obstructions.
12. Prepare container to hold laser tube after
removal from machine.
13. Carefully lift laser tube out of saddles and
place into container.
14. G0913/G0914 Only: Repeat Steps 6–13 on
secondary laser tube.
10. Remove saddle-strap cap screws in an
alternating pattern, and then remove saddle
straps (see
Figure 97).
IMPORTANT: When removing saddle straps
for laser tube removal, DO NOT loosen
or reposition saddles. Saddles are factory-
aligned and require many additional steps to
re-align if original alignment is altered.
4. Disconnect water hose(s) at OUTLET port(s)
of water chiller, and manually blow through
hose(s) several times to purge laser tube(s)
and hoses of water.
IMPORTANT: Remove as much residual
water from laser tube(s) as possible. If freez-
ing temperatures occur, laser tube glass will
crack and render laser tube inoperable.
5. Install caps or tape on all open water ports
and hoses to keep system sealed and free
from contaminants and obstructions.
6. Remove any covers or sleeves on laser tube.
7. Disconnect anode and cathode wires from
laser tube (see Figure 96).
8. At laser tube INLET and OUTLET water
spouts (see
Figure 96), cut off water hose at
end of spout, and with utility knife, carefully
slit remaining hose until it can be peeled off.
IMPORTANT: DO NOT attempt to pull hose
directly off of spout. Doing so could break
glass water spout.
9. Install caps or tape on both open water hoses
to keep system sealed and free from con-
taminants and obstructions.
Anode
Wire
Cathode
Wire
Water Outlet Spout
Water Inlet Spout
Saddle
Strap
(1 of 2)
Saddle
(1 of 2)