GREER Company MICROGUARD 434, Руководство по калибровке

Страница: 28 / 39

GREER COMPANY
GREER COMPANY GREER COMPANY
GREER COMPANY
Crane Systems Crane Systems Crane Systems Crane Systems
GREER COMPANY 1918 EAST GLENWOOD PLACE SANTA ANA, CALIFORNIA 92705 PN W453201A 08/10/00
MicroGuard
®
434/500 CALIBRATION MANUAL TEL: 714) 259-9702 FAX: 714) 259-7626
28
OF
39
EXAMINE DETAILS OF ROPE DATA FOLLOWING THE STEPS BELOW.
COMMAND 10 DETAILS OF ROPE DATA COMMAND 10 DETAILS OF ROPE DATA COMMAND 10 DETAILS OF ROPE DATA COMMAND 10 DETAILS OF ROPE DATA
0 .
ENTER THE CALIBRATION MODE AND CALIBRATION CODE, IF NOT ALREADY DONE.
REFER TO PAGE 5.
1.
CHOOSE MENU UP OR MENU DOWN AND GO TO 10 ROPE LIMITS. ................................................
2 22 2
OR
3 3 3 3
2.
START 10 ROPE LIMITS. ....................................................................................................................................
1 11 1
THE DISPLAY WILL READ: ENTER ROPELIM 0.
CURRENTLY = XX.XX.
3
. CHOOSE EXIT AND GO TO ROPE LIMIT NO. 1. ..............................................................................................
6
66
6
THE DISPLAY WILL READ: ENTER ROPELIM 1.
CURRENTLY = XX.XX
4
. EXIT THE ROUTINE. ............................................................................................................................................
6
66
6
REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4.
Use the designated arrow key (
1, 2, 3, 4, or 6 1, 2, 3, 4, or 6 1, 2, 3, 4, or 6 1, 2, 3, 4, or 6
) appearing to the right of each step
when ENTERING or EXITING a COMMAND
and to CHOOSE, START, CONFIRM, ABORT, RESET, or ENTER an action.