GREER Company MICROGUARD 434, Руководство по калибровке

Страница: 18 / 39

GREER COMPANY
GREER COMPANY GREER COMPANY
GREER COMPANY
Crane Systems Crane Systems Crane Systems Crane Systems
GREER COMPANY 1918 EAST GLENWOOD PLACE SANTA ANA, CALIFORNIA 92705 PN W453201A 08/10/00
MicroGuard
®
434/500 CALIBRATION MANUAL TEL: 714) 259-9702 FAX: 714) 259-7626
18
OF
39
COMMAND 04 SWING
COMMAND 04 SWING COMMAND 04 SWING
COMMAND 04 SWING POT
POT POT
POT DIRECTION
DIRECTION DIRECTION
DIRECTION
COMMAND 04
COMMAND 04 COMMAND 04
COMMAND 04 SWING POT DIRECTION
SWING POT DIRECTION SWING POT DIRECTION
SWING POT DIRECTION
0.
ENTER THE CALIBRATION MODE AND CALIBRATION CODE, IF NOT ALREADY DONE.
REFER TO PAGE 5.
1.
CHOOSE MENU UP OR DOWN AND GO TO 04 SWING POT. .................................................................
2 22 2
OR
3 33 3
2
. START 04 SWING POT. .........................................................................................................................................
1 11 1
3.
CHOOSE DIRECTION. ................................................................................................................................
2 22 2
OR
3 33 3
THE CENTER DISPLAY WILL READ (+ OR -).
4.
ROTATE THE UPPER APPROX. 10
°°°°
TO THE RIGHT.
5
. THE NUMBERS ON THE DISPLAY SHOULD
INCREASE
INCREASE INCREASE
INCREASE
TO APPROX. 10
°°°°
.
IF NOT, CHANGE THE DISPLAY TO REFLECT THE OPPOSITE DIRECTION. .................................................
2
22
2
6.
EXIT. ........................................................................................................................................................................
3
33
3
7.
EXIT THE ROUTINE. ..............................................................................................................................................
6
66
6
REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4.
Use the designated arrow key (
1, 2, 3, 4, or 6
1, 2, 3, 4, or 6 1, 2, 3, 4, or 6
1, 2, 3, 4, or 6
) appearing to the right of each step
when ENTERING or EXITING a COMMAND
and to CHOOSE, START, CONFIRM, ABORT, RESET, or ENTER an action.