GREER Company MICROGUARD 434, Руководство по калибровке

Страница: 23 / 39

GREER COMPANY
GREER COMPANY GREER COMPANY
GREER COMPANY
Crane Systems Crane Systems Crane Systems Crane Systems
GREER COMPANY 1918 EAST GLENWOOD PLACE SANTA ANA, CALIFORNIA 92705 PN W453201A 08/10/00
MicroGuard
®
434/500 CALIBRATION MANUAL TEL: 714) 259-9702 FAX: 714) 259-7626
23
OF
39
The head angle routines allow entry of the boom head deflection angles against extension. These angles are used to
correct the computed radius for flys and jibs.
If this system is
not a prototype, all of this information has been precalibrated and this routine can be ignored.
COMMAND 07 HEAD ANGLE COMMAND 07 HEAD ANGLE COMMAND 07 HEAD ANGLE COMMAND 07 HEAD ANGLE
START WITH THE BOOM FULLY RETRACTED
START WITH THE BOOM FULLY RETRACTED START WITH THE BOOM FULLY RETRACTED
START WITH THE BOOM FULLY RETRACTED
COMMAND 08 ATTACHMENTS
COMMAND 08 ATTACHMENTS COMMAND 08 ATTACHMENTS COMMAND 08 ATTACHMENTS
0.
ENTER THE CALIBRATION MODE AND CALIBRATION CODE, IF NOT ALREADY DONE.
REFER TO PAGE 5.
1.
CHOOSE MENU UP OR MENU DOWN AND GO TO 07 HEAD ANGLE. ..........................................
2 22 2
OR
3 33 3
2
. START 07 HEAD ANGLE. ................................................................................................................................
1 11 1
3.
CHOOSE LEN.0 TO CALIBRATE THE FIRST HEAD ANGLE AND EXTENSION PAIR. ..............................
1
11
1
4.
CHOOSE NEW EXTENSION. ..........................................................................................................................
1 11 1
5
. CHOOSE 'YES' TO CALIBRATE. ....................................................................................................................
1
11
1
6.
USE THE NUMBER ENTRY ROUTINE TO ENTER THE CURRENT EXTENSION.
7.
CHOOSE EXIT TO ENTER A NEW HEAD ANGLE. ........................................................................................
6 66 6
8.
CONFIRM/ABORT ENTRY. ..................................................................................................
1
1 1
1
YES
/3
/3 /3
/3
ABORT
9.
USE THE NUMBER ENTRY ROUTINE TO ENTER THE MEASURED HEAD ANGLE.
10.
EXIT. .................................................................................................................................................................
6 66 6
11
. TELESCOPE THE BOOM TO THE NEXT LENGTH.
12
. MOVE TO THE NEXT LENGTH LEN.1 (UP TO 7 LENGTHS CAN BE ENTERED). OR GO TO STEP 13.
13.
EXIT THE ROUTINE. ........................................................................................................................................
6 66 6
REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4
REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4
REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4.
Use the designated arrow key (
1, 2, 3, 4, or 6 1, 2, 3, 4, or 6 1, 2, 3, 4, or 6 1, 2, 3, 4, or 6
) appearing to the right of each step
when ENTERING or EXITING a COMMAND
and to CHOOSE, START, CONFIRM, ABORT, RESET, or ENTER an action.