GREER COMPANY
GREER COMPANY
GREER COMPANY
GREER COMPANY
Crane Systems
Crane Systems
Crane Systems
Crane Systems
GREER COMPANY 1918 EAST GLENWOOD PLACE SANTA ANA, CALIFORNIA 92705
PN W453201A 08/10/00
MicroGuard
®
434/500 CALIBRATION MANUAL
TEL: 714) 259-9702 FAX: 714) 259-7626
11
OF
39
COMMAND 01
COMMAND 01
COMMAND 01
COMMAND 01 CRANE DATA
CRANE DATA
CRANE DATA
CRANE DATA
NOTE 1:
NOTE 1:
NOTE 1:
NOTE 1:
IF THIS IS NOT A PROTOTYPE CALIBRATION, ALL CALIBRATION DATA WILL BE STORED IN THE
SYSTEM CHIP. IN ORDER TO MODIFY THIS DATA, DOWNLOAD NEW OR CHANGED DATA. THE 'CRANE DATA
RESET' WILL NEED TO BE PERFORMED.
NO
NO
NO
NOTE 2:
TE 2:
TE 2:
TE 2: ALWAYS
ALWAYS
ALWAYS
ALWAYS
PERFORM CRANE DATA RESET ON A NEW OR PROTOTYPE SYSTEM BEFORE BEGINNING
CALIBRATION OR TESTING.
COMMAND 01
COMMAND 01
COMMAND 01
COMMAND 01 ---- CRANE DATA
CRANE DATA
CRANE DATA
CRANE DATA
PERFORMING A CRANE DATA RESET WILL REPLACE
CALIBRATED DATA WITH DATA STORED IN THE SYSTEM CHIP.
WARNING
!
0.
ENTER THE CALIBRATION MODE AND CALIBRATION CODE, IF NOT ALREADY DONE.
REFER TO PAGE 5.
1.
CHOOSE MENU UP OR MENU DOWN AND GO TO 01 CRANE DATA.
.........................................
2
22
2
OR
3
2.
START 01 CRANE DATA.
.............................................................................................................................
1
11
1
3.
RESET CRANE DATA.
..................................................................................................................................
1
11
1
4.
CHOOSE YES! CALIBRATE OR NO! ABORT.
.............................................................
1
1
1
1
YES
YES
YES
YES
/ 3
/ 3
/ 3
/ 3
ABORT
ABORT
ABORT
ABORT
5.
ENTER THE CALIBRATION CODE.
.............................................................................
1 6 3 4
1 6 3 4
1 6 3 4
1 6 3 4
6.
THE DISPLAY WILL READ: CRANE DATA 'CALIBRATING.'
WHEN THE DISPLAY CHANGES TO 'PERSONALITY GOOD,' EXIT THE ROUTINE.
............................
6
66
6
7.
IF THE DISPLAY READS:
'
PERSONALITY NOT GOOD," RETURN TO STEP 3,
'RESET CRANE DATA' AND CONTINUE.
. ...................................................................................................
1
11
1
REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4
REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4
REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4
REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4.
Use the designated arrow key (
1, 2, 3, 4, or 6
1, 2, 3, 4, or 6
1, 2, 3, 4, or 6
1, 2, 3, 4, or 6
) appearing to the right of each step
when ENTERING or EXITING a COMMAND
and to CHOOSE, START, CONFIRM, ABORT, RESET, or ENTER an action.
