GREER Company MICROGUARD 434, Руководство по калибровке

Страница: 14 / 39

GREER COMPANY
GREER COMPANY GREER COMPANY
GREER COMPANY
Crane Systems Crane Systems Crane Systems Crane Systems
GREER COMPANY 1918 EAST GLENWOOD PLACE SANTA ANA, CALIFORNIA 92705 PN W453201A 08/10/00
MicroGuard
®
434/500 CALIBRATION MANUAL TEL: 714) 259-9702 FAX: 714) 259-7626
14
OF
39
COMMAND 02
COMMAND 02 COMMAND 02
COMMAND 02 ---- ZERO BOOM ANGLE SENSOR
ZERO BOOM ANGLE SENSOR ZERO BOOM ANGLE SENSOR
ZERO BOOM ANGLE SENSOR
COMMAND 02 COMMAND 02 COMMAND 02 COMMAND 02 ---- ZERO BOOM ANGLE SENSOR ZERO BOOM ANGLE SENSOR ZERO BOOM ANGLE SENSOR ZERO BOOM ANGLE SENSOR
0
ENTER THE CALIBRATION MODE AND CALIBRATION CODE, IF NOT ALREADY DONE.
REFER TO PAGE 5.
1.
CHOOSE MENU UP OR MENU DOWN AND GO TO 02 ZERO SENSOR. .........................................
2
22
2
OR
3
33
3
2.
START 02 ZERO SENSOR. .............................................................................................................................
1
11
1
THE DISPLAY WILL READ: ZERO NO. 2 XXX (ACTUAL INPUT).
3.
CHOOSE MENU UP OR MENU DOWN AND GO TO ZERO NO. 3. ...................................................
2
22
2
OR
3
33
3
4.
CONFIRM THE SELECTION. .........................................................................................................................
1
11
1
THE DISPLAY WILL READ: YES! CALIBRATE! OR NO, EXIT/ABORT!
5.
START THE CALIBRATION OF SENSOR NO. 3. ...........................................................................................
1 11 1
THE DISPLAY WILL READ ZERO NO. 3 XXX (ZEROED INPUT)
OR ABORT THE CALIBRATION.
....................................................................................................................
3 33 3
6.
EXIT THE ROUTINE ........................................................................................................................................
6 66 6
OR SEE STEP 7.
7.
CHOOSE MENU UP OR MENU DOWN TO CHANGE SENSOR. .......................................................
2 22 2
OR
3 33 3
REVIEW THE SAMPLE DISPLAY SCREEN ON P REVIEW THE SAMPLE DISPLAY SCREEN ON P REVIEW THE SAMPLE DISPLAY SCREEN ON P REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 AGE 4 AGE 4 AGE 4.
Use the designated arrow key (
1, 2, 3, 4, or 6 1, 2, 3, 4, or 6 1, 2, 3, 4, or 6 1, 2, 3, 4, or 6
) appearing to the right of each step
when ENTERING or EXITING a COMMAND
and to CHOOSE, START, CONFIRM, ABORT, RESET, or ENTER an action.