GREER Company MICROGUARD 434, Руководство по калибровке

Страница: 32 / 39

GREER COMPANY
GREER COMPANY GREER COMPANY
GREER COMPANY
Crane Systems Crane Systems Crane Systems Crane Systems
GREER COMPANY 1918 EAST GLENWOOD PLACE SANTA ANA, CALIFORNIA 92705 PN W453201A 08/10/00
MicroGuard
®
434/500 CALIBRATION MANUAL TEL: 714) 259-9702 FAX: 714) 259-7626
32
OF
39
COMMAND 13 MONITOR
COMMAND 13 MONITOR COMMAND 13 MONITOR
COMMAND 13 MONITOR
The monitor function allows the operator to view RAW CRANE CALIBRATION DATA. This routine is for data
monitoring only! It is not possible to calibrate in this routine.
COMMAND 13 MONITOR COMMAND 13 MONITOR COMMAND 13 MONITOR COMMAND 13 MONITOR
Boom Moment data WG, WT, and Len-s can be viewed for each boom mode (up to 4) and each
extension (up to 7). Also the Head Angle and BDC F-Factor, as well as the BDC F-Factor for the
currently selected fly is also available.
0.
ENTER THE CALIBRATION MODE AND CALIBRATION CODE, IF NOT ALREADY DONE.
REFER TO PAGE 5.
1
CHANGE THE BOOM MODE. ............................................................................................................
1
2.
THE NEXT EXTENSION. ........................................................................................................ ...........
2
3.
THE PREVIOUS EXTENSION. ...........................................................................................................
3
4.
EXIT. ...................................................................................................................................................
6
REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4.
Use the designated arrow key (
1, 2, 3, 4, or 6 1, 2, 3, 4, or 6 1, 2, 3, 4, or 6 1, 2, 3, 4, or 6
) appearing to the right of each step
when ENTERING or EXITING a COMMAND
and to CHOOSE, START, CONFIRM, ABORT, RESET, or ENTER an action.